Tempest 2 Induction Heater Settings
Higher fill-weight balls store heat longer → smoother, slower heat-up
Lower fill-weight balls heat up faster → quicker, punchier hit
The fill weights listed are approximate, actual ball sizes can vary slightly.
Lower fill-weight balls heat up faster → quicker, punchier hit
The fill weights listed are approximate, actual ball sizes can vary slightly.
Lower the YLL 3.0 wattage to pre-heat the bowl more before your draw. This gives a faster ramp-up once you start inhaling, which is especially beneficial for mouth-to-lung (short puffs) use.
The temperature settings on The Wand function as a timer rather than indicating actual temperature. Wand temperatures are for V3 adapter until “Time Over”.
V1 adapter: +50 °C | V2 (plastic) adapter: –20 °C
V1 adapter: +50 °C | V2 (plastic) adapter: –20 °C
| Ball Material | Fill Weight | YLL 3.0 Settings |
Wand Temp |
|---|---|---|---|
| Stainless Steel | 5.3 g | 60 W → 49–54 s 80 W → 38–43 s 100 W → 29–32 s |
320 °C / 610 °F |
| Zirconia (Default) | 3.9 g | 60 W → 45–50 s 80 W → 35–40 s 100 W → 27–30 s |
290 °C / 555 °F |
| Ruby | 2.7 g | 60 W → 49–54 s 80 W → 38–43 s 100 W → 29–32 s |
320 °C / 610 °F |
| Silicon Carbide | 2.1 g | 60 W → 40–45 s 80 W → 31–36 s 100 W → 24–27 s |
260 °C / 500 °F |
| Borosilicate Glass | 1.5 g | 60 W → 39–43 s 80 W → 30–35 s 100 W → 23–26 s |
250 °C / 480 °F |
| Quartz Glass | 1.5 g | 60 W → 39–43 s 80 W → 30–35 s 100 W → 23–26 s |
250 °C / 480 °F |