A must have for any DIY project for a Tempest/Revolve sleeve.
The same Stainless Steel liner is used on wood sleeves.
It can be used as a SS sleeve, but looks aren't appealing, and it will get hot with the Helix/DRC airflow tube.
Sleeve length: 54.2mm ; air hole start at 11mm from the short side of the sleeve ; Cooling Unit airflow hole is 3mm ø
Weight:
11mm ø quartz: 5g
Titanium V1: 5.5g
12mm ø quartz: 7.3g
Titanium V2: 7.7g
Tempest titanium: 12.5g
Maple Revolve wood: 9g
Tempest wood: ~9g
DIY SS liner: 5.5g
CU and MP assembly is about 10g for all versions