Tempest Radiator Sleeve

It looks beautiful and works wonders. I can feel the radiator getting warm after prolonged use, but the shield keeps my fingers far away from any hot spots.

The new Tempest/Revolve V3 titanium sleeve now has two parts, the Radiator sleeve and a Heatshield.
An O-ring and a notch keeps them together, there is only one way to connect them.
A tiny play can be felt, when moving on purpose the stem and the heatshield in opposite directions, but I can't notice when using the device.

Tempest finishing isn't as polished as the Revolve V2, the edges are sharper and give a better grip, but nothing harmful for the fingers.
Looks are subjective, but the futuristic/industrial/light saber style can't be ignored.
   
Between all Mad Heaters ti sleeve versions, this titanium sleeve is my favorite.
With Revolve V1V2, my sleeve of choice is always the wood or quartz sleeve, but the Heatshield on the V3 changes that.
With Wand use, the ti sleeve stays comfortable near the airflow hole and produces a bit less reclaim than the quartz.
I also like the bowl locking tabs function on the titanium sleeve, useful when the Bowl O-rings get older.

Torch users need the wood sleeve for consecutive heating, longer sessions, mainly for a comfortable hand position, when slowly spinning the device.
However, if you just go for one quick bowl, then a break, the ti sleeve will be enough and handle the heat.
Titanium cools quickly, a two minutes cooling time, with the Tempest Cap separated from the rest, is also very effective.

If the user draws too much hot air from the heater, the sleeve will get unnecessarily hotter, without an increased vapor production.
For users new to the Revolve stem, a 12mm quartz sleeve is also nice when discovering all the airflow settings.

Tempest/Revolve stem is all about cooling and airflow balance, an experienced user can switch settings for small and short tokes or big and longer draws at different vapor temp.
Vapor cooling, airflow, flavor, stem temperature, and cleaning frequency also change depending on the stem settings.

To fit the MH plastic tube (for cleaning), the Heatshield has to be taken off.

Tempest stem is a Revolve V3, here the compatibility chart:
First, the version of Mouthpiece and Airflow tube has to be paired together V1 MP + V1 Airflow tube V2+V2 V3+V3

-V3 Cooling unit only accept V3 and V2 Mouthpiece and Airflow tube

-V2 Cooling unit only accept V2 and V3

-V1 Cooling unit only accept V1 and V2

Secondary Cooling Unit needs a V2 or a V3 airflow tube
V2 Reclaim Screen Filter can clip and stay in place only into the V2 Cooling unit
All Tempest/Revolve sleeves fits all Cooling unit versions

Sleeve length: 54.2mm ; air hole start at 11mm from the short side of the sleeve ; Cooling Unit airflow hole is 3mm ø
Weight:
11mm ø quartz: 5g
Titanium V1: 5.5g
12mm ø quartz: 7.3g
Titanium V2: 7.7g
Tempest titanium: 12.5g
Maple Revolve wood: 9g
Tempest wood: 9g
DIY SS liner: 5.5g

CU and MP assembly is about 10g for all versions

I love the attention to detail superior quality customer service. Revolve Gen 2 all parts to include the screen WOW! I tried the wood, glass, and titanium. Love the resin catcher (tasty). I also tried both mouth piece parts excellent. My favorite is all the positions depending upon my mood. It's 10 or more vapes in one. Flavor and dependable vaper on every experience. 😋 Denver Colorado